GoldCoin Talk
Main Category => Technical Discussion => Topic started by: kbclickbank on December 15, 2013, 04:45:47 AM
-
Hello Goldcoin Forum,
I new to mining and just setup a CPU mining but found out GPU provides more so now i like to try out GPU and with that i have some problems as i will describe below.
I have following:
On-board graphics adapter model: Intel HD Graphics 3000
Discrete graphics adapter model: NVIDIA GeForce GT 555M
Discrete graphics adapter memory: 2048 MB
I know that not a good setup but some place i need to start :)
I have look on: https://github.com/Anoncoin/anoncoin/wiki/Mining-hardware-comparison#wiki-ATI_AMD_GPUs to see which miner i need. And it says i need: Cudaminer 2013-04-30 but also says on operating system: Windows 8 Pro 64-bit but i run on Windows 7 Home Premium 64-bit
Then i download that and run following bat file with http:// and stratum+tcp://
cudaminer.exe -o http://gld.cryptcoins.net:5533 -O username.worker:password
And also try this one also try with another network with http:// and stratum+tcp://
cudaminer.exe -o http://gld.cryptoplanet.net:3333 -O username.worker:password
When i run the bat file is says:
HTTP request failed: Empty reply from server.
json_rpc_call failed, retry after 15 secounds.
Hope a friendly member can help me
Thanks / Regards
Lasse
-
Firewall? Not sure...
Are you using the pc of your office?
I also experienced this in our school.
I can't run on school pc but the same setting works great on my pc at home.
-
I just try to add cudaminer.exe to be allowed by firewall and try to run the bat file agian now i get me this message:
HTTP request failed: Failed connect to 127.0.0.1:9332; No error
No this is my computer at home i try with.
-
HTTP request failed: Failed connect to 127.0.0.1:9332; No error
That one is wrong is was because i forgot to run cudaminer.exe with bat file. And just run cudaminer.exe
-
I have try with
cudaminer-2013-07-13>cudaminer.exe --url=stratum+tcp://
gld.cryptoplanet.net:3333 --userpass=username.worker:pasword --threads=2
*** CudaMiner for nVidia GPUs by Christian Buchner ***
This is version 2013-07-13 (alpha)
based on pooler-cpuminer 2.3.2 (c) 2010 Jeff Garzik, 2012 pooler
Cuda additions Copyright 2013 Christian Buchner
My donation address: LKS1WDKGED647msBQfLBHV3Ls8sveGncnm
[2013-12-15 14:13:00] 2 miner threads started, using 'scrypt' algorithm.
[2013-12-15 14:13:00] Starting Stratum on stratum+tcp://gld.cryptoplanet.net:333
3
[2013-12-15 14:13:01] Stratum detected new block
[2013-12-15 14:13:02] GPU #1: ♂~↔ with compute capability 53212116.1626784317
[2013-12-15 14:13:02] GPU #1: interactive: 1, tex-cache: 0 , single-alloc: 0
[2013-12-15 14:13:02] GPU #0: GeForce GT 555M with compute capability 2.1
[2013-12-15 14:13:02] GPU #0: interactive: 1, tex-cache: 0 , single-alloc: 0
[2013-12-15 14:13:02] GPU #1: Performing auto-tuning (Patience...)
[2013-12-15 14:13:02] GPU #1: 0.00 khash/s with configuration 0x0
[2013-12-15 14:13:02] GPU #1: using launch configuration 0x0
[2013-12-15 14:13:03] GPU #0: Performing auto-tuning (Patience...)
When it come to the last one it crash and say: cudaminer.exe is stopped to operate
-
I try with a newer version cudaminer-2013-07-13:
With new bath file cudaminer.exe --url=stratum+tcp://gld.cryptoplanet.net:3333 --userpass=username.worker:password --threads=1
First try with 2 threads but it crash because the Intel HD Graphics 3000 not work to mining with.
Hope this can help others
-
You have a stoneage old version, get the latest from here: https://bitcointalk.org/index.php?topic=167229.0
It should even provide some speed up from your old version.